Wolf Tooth Elliptical Direct Mount Chainring – 30t RaceFace/Easton CINCH Direct Mount Drop-Stop 6mm Offset Black. Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life mud clearance and chain retention.
Elliptical chainring shape provides better efficiency in the recovery zone as well as increased traction thanks to consistent torque
Drop-Stop chainrings are designed for use with 1×9 1×10 1×11 and 1×12 drivetrains
Compatible with all 10- 11- and 12-speed chains with the exception of Shimano 12-speed chains
Shimano 12-speed chains require the use of Wolf Tooths Shimano 12-speed specific chainrings
If using a 9-speed drivetrain use a 10-speed chain which will provide a tighter fit for better chain retention
Made from 7075-T6 aluminum for long life
Use of a clutch-style rear derailleur is recommended
| Color |
Black |
| Ring Position/Type |
Chain Retaining Single Ring |
| Tooth Count |
30 |
| Round or Oval |
Oval |
| Drivetrain Speeds |
10 |
| Drivetrain Speeds |
11 |
| Drivetrain Speeds |
12 |
| Drivetrain Speeds |
9 |
| Chainring BCD |
Direct Mount CINCH |
| Offset |
6 |
| Chainline/Hub Compatibility |
135/142 MTB Hubs |
| Chainline/Hub Compatibility |
170/177 Hubs |
| Chainline/Hub Compatibility |
190/197 Hubs |
| Chainline/Hub Compatibility |
150/157 DH Hubs |
| Chainline/Hub Compatibility |
157 Super Boost Hubs |
| Material |
Aluminum |
| Material |
Aluminum |
| Defined Color |
Black |
| Direct Mount Type |
Direct Mount CINCH |
Reviews
There are no reviews yet.